ちょっとした質問②

板 1- 前次新更 TB AA ﾚｽ

■ ちょっとした質問②

[666]OBD Connector：2011/08/27(土) 03:25:33 ID:???
<img>dandebiz</img>
Tips on how to Use ELM327 OBD-II OBD2 CAN USB Interface Diagnostic Tool
ELM327 OBD-II OBD2 CAN USB Interface Diagnostic Tool is quite straightforward to make use of. Just turn your laptop or computer into a auto diagnostic method. This interface with software program included is all you need. Works for most of cars immediately after 1996. It can read and clear all diagnostic trouble codes. Display all of the live data of your auto.
ELM 327 Directions:
There are many software program for running <a href=dandebiz>ELM327</a>, now we are talking about software EasyobdII 2.2 version.
1. 1st, Connect your laptop with your auto and turn the important on or turn the engine to be running.
2. The hardware will likely be detected and automatically installed, ready to use. Otherwise, you should use driver file to install it.
three. Should you use Windows Vista, only the software EasyobdII 2.2 works with Vista. For rest operation system need to not such issues.
four. In the 1st attempt, you could have trouble and see screen like the following.
One can find five choices like com1, com2, ...com5.
five. At this step, you'll need Go to Control Panel--> program --> Device manager -->Ports(Com&LPT) --> USB serial port(com?), to find out which com number you need choose.
6. If the above com number is com1, Restart program EasyobdII, choose COM port as com#1 at bottom line of program, and let the program detect automobile ECU.
7. The system will generate information and shows on screen.
8. Other thing to try: plug and unplug <a href=dandebiz>vag tacho</a> and make sure connection is OK; or try a different usb port of your laptop.

前次新更 TB